1932 Ford five window coupe

Started this one a while ago but stoped after I found that when I went to put tail shalf in the diff is up side down      so put it a side to build the Mustang will look at ungluing the diff and put it in the right way around  just sat body on for photo   Oh was going to use the steel rims for it but found that the backing plates did not fit, they were real lose so end up with the mags.

Good start Allan, nice red,

Looking good Al , you're on a roll now , keep it going .

Looking great Allen. Love '32's.

Josh.

Thanks All, colours are all Tamiya color acrylic, red is X-7,Black is XF-1 which is a flat, inside is XF-55 deck tan flat, will look at taking diff out today.

very nice build Allan:looksgreat:

just looked at the diff its the right way around, looks like the centre is wrong on it    Oh found a good glue to put windows in its called Formula 560 its used for putting windows in RC airplanes, its milky white drys clear. Here is photo of bottle you don't need much,


 

Where did you find it Allan?

That looks great Allan, SWEET paint too mate, stick with the Tamiya paints i reckon mate, that looks brilliant. I use this glue for my windows too, it is great, also, when you put a decal on for the speedo etc, put a bit of this glue over it, when it dries, it looks like it has glass over the speedo, bit more realistic.

Thanks DeeCee for the tip on putting bit of glue on decal in speedo, ya will be staying with Tamiya paints.

Got the problem with diff fixed with this one,   One thing I have found is that the diff is not very wide could 2mm more each side, tyres sit to close to the chassis rails,   would I buy another one NO its a pig of a kit. Any way will finish building it.